Monday, January 17, 2011

Talking about my antique mystery pencil Opel.

Main view.
Open. To compare I put near black 1.18 mm pencil.
Comparing 2 sizes. Opel on the right, opening is much bigger than in other, black pencil with 1.18 mm opening. I tried  to insert 2 mm, but it is too big. So what size lead this 4 color Opel should take? 1.8 mm?

7 comments:

  1. It maybe an optical distortion of the photo, but the hole in the Opel - is it round? It almost looks square. Square leads were used in "the good old days".

    ReplyDelete
  2. Hi Kiwi-d, It is round. Just hard to take sharp photo of it. It is smaller than 2 mm, but bigger than 1.18mm
    Still searching the web for analog, but can't find so far.

    ReplyDelete
  3. It is possible to manufacture your own customs leads by rolling them down from a bigger size. Example you start with a 2mm lead and roll it down bit by bit until it fits. Bit of a drama, but might turn out to be your easiest option.

    ReplyDelete
  4. Thank you, Kiwi-d, I thought about it, but it is really painful. It is a chance to get some 1.8 mm from Pendemonium site, but I am still not sure if it 1.8 mm or may be even 1.3 mm what I need for this pencil.

    ReplyDelete
  5. On my blogger profile there is a contact me email address. I have a suggestion but its best off-blog.

    ReplyDelete
  6. Hello - I know this is from years ago but I wanted to ask if you ever found the leads for this pencil. I picked one up today at a pen show and have been scouring the internet for replacement leads.

    Regards,
    Salman Khattak

    ReplyDelete
  7. Hi, Salman!
    I was not lucky, I gave up on my searches, I found some sellers on eBay, but they won't sell it without the pencil. So if you will find something, please, let me know, please. Thank you.

    ReplyDelete

Hi, d'love to hear from you.